LDE-HS + LDE-HS BI (Binocular)

I misuratori LDE HS sono basati sul principio della triangolazione e possono leggere distanze e spessori con risoluzioni micrometriche.
Vantaggi principali
-
Alta velocità di campionamento fino a 9400 Hz
-
Custodia compatta in alluminio
-
Dotati sia di uscita digitale RS232 a 12 bit che di uscite analogiche in corrente e tensione a richiesta
-
Uscita Digitale RS485
-
BUS di Campo CAN-OPEN / DEVICE-NET / ETHERNET
-
Misurano distanze. profondità, spessori, profili, ecc.
-
Alimentazione 18 - 36Vcc, 120 mA
-
Trigger esterno TTL per sincronizzazione
-
Connettore IP67 tipo Binder serie 702
-
Temperatura di utilizzo -10...+60°C
General information
The sensors are intended for non-contact measuring and checking of position, displacement, dimensions, surface profile,
deformation, vibrations, sorting and sensing of technological objects as well as for measuring levels of liquid and bulk materials.
The series includes 26 sensors with the measurement range, from 2 to 1250 mm and the base distance from 10 to 260 mm.
There are two options of laser mounted in the sensor, RED or BLUE laser. The use of blue lasers instead of conventional red lasers
greatly enhances capabilities of the sensors, in particular, for such uses as control of high-temperature objects and organic
materials. Custom-ordered configurations are possible with parameters different from those shown below.
■■ Universal laser sensors
■■ Measuring ranges from 2 to 1250 mm
■■ Linearity ±0.05%
■■ Resolution ±0.01%
■■ Sampling rate up to 9.4 kHz
■■ RS232/RS485/Ethernet/CAN +4...20 mA/0...10V
■■ Binocular sensors
■■ Sensors with BLUE lasers
Laser Triangulation Sensors LDE-HS Specification
(universal sensors with 2 to 1250 mm operating ranges)
LDE-HS- | R-X/4 | X/2 | X/5 | X/10 | X/15 | X/25 | X/30 | X/50 | X/100 | X/250 | X/500 | X/750 | X/1000 | X/1250 | |
Base distance X, mm | 39 | 15 | 15 | 15, 25, 60 | 15, 30, 65 | 25, 45, 80 | 35, 55, 95 | 45, 65, 105 | 60, 90, 140 | 80 | 125 | 145 | 245 | 260 | |
Measurement range, mm | 4 | 2 | 5 | 10 | 15 | 25 | 30 | 50 | 100 | 250 | 500 | 750 | 1000 | 1250 | |
Linearity, % | ±0.05 of the range | ±0.1 | |||||||||||||
Resolution, % | 0.01 of the range (for the digital output only) | 0.02 | |||||||||||||
Temperature drift | 0,02% of the range/°С | ||||||||||||||
Max. measurement frequency, Hz | 9400 | ||||||||||||||
Light source |
red semiconductor laser, 660 nm wavelength or UV semiconductor laser 405 nm wavelength (BLUE version) |
||||||||||||||
Light source:
|
|||||||||||||||
model | RF603 | ||||||||||||||
output power | ≤0,2 | ≤3 mW | |||||||||||||
laser safety Class | 1 | 3R (IEC60825-1) | |||||||||||||
model | RF603L |
|
|||||||||||||
output power | ≤0,95 mW |
|
|||||||||||||
laser safety Class | 2 (IEC60825-1) |
|
|||||||||||||
model | RF603Р | ||||||||||||||
output power | ≤20 mW | ||||||||||||||
laser safety Class | 3В (IEC60825-1) | ||||||||||||||
Output Interface:
|
|||||||||||||||
digital |
RS232 (max. 460,8 kbit/s) or RS485 (max. 921,6 kbit/s) or RS232 and CAN V2.0B (max 1Mbit/s) or Ethernet and (RS32 or RS485) |
||||||||||||||
analog | 4…20 mA (≤ 500 Ω load) or 0…10 V | ||||||||||||||
Synchronization input | 2,4 – 5 V (CMOS, TTL) | ||||||||||||||
Logic output | programmed functions, NPN: 100 mA max; 40 V max for output | ||||||||||||||
Power supply, V | 9 …36 | ||||||||||||||
Power consumption, W | 1,5..2 | ||||||||||||||
Environment resistance:
|
|||||||||||||||
Enclosure rating | IP67 ( for the sensors with cable connector only) | ||||||||||||||
Vibration | 20g/10…1000Hz, 6 hours, for each of XYZ axes | ||||||||||||||
Shock | 30 g / 6 ms | ||||||||||||||
Operation temperature, °С |
-10…+60, (-30…+60 for the sensors with in-built heater), (-30…+120 for the sensors with in-built heater and air cooling housing) |
||||||||||||||
Permissible ambient light, lx | 10000 – RF603L, 30000 – RF603, >30000 – RF603P | ||||||||||||||
Relative humidity | 5-95% (no condensation) | ||||||||||||||
Storage temperature, °С | -40…+70 | ||||||||||||||
Housing material | aluminum | ||||||||||||||
Weight (without cable), gram | 100 |
Note 1: All the values are given for white matt surfaces and may vary for the surfaces with other characteristics.
Note 2: LDE-HS-R-39/4 sensor is designed to use with mirror surfaces and glass.
Operation of the sensors is based on the principle of optical triangulation. Radiation of a semiconductor laser 1 is focused by a lens 2 onto an object 6. Radiation reflected by the object is collected by a lens 3 onto a linear CCD-array 4. A signal processor 5 calculates the distance to the object from the position of the light spot on the array 4.
BINOCULAR LASER TRIANGULATION
SENSORS LDE-HS BI SERIES

Prodotti
Photo gallery


















Contattaci
Non esitate a contattarci, saremo lieti di soddisfare qualsiasi vostra richiesta di informazione di natura tecnica ed economica,relative alla nostra sensoristica.
Chiedi informazioni