Sistema di Misura del Diametro Interno con Multisensori Serie RF040-...
The system is designed for non-contact measuring of inner diameter of cylindrical and taper pipes, gun barrels. The system is used on the production line as the quality control tool
Measurement range (diameter), mm : 65...115
Accuracy, µm : ±25
Number of laser sensors : 6
Operation of the system is based on the hole surface coordinates measurement by point laser triangulation sensors.
The system contains 3-6 point laser triangulation sensors located circumferentially in one housing at known fixed angles (see Figure 1).
Figure 1. The system with six laser sensors
The system operates as follows.
The measurement system is inserted into the pipe and moved by translation module to the definite position. Laser sensors measure distances to the inner surface. Software calculates inner diameter of the pipe.
Overall and mounting dimensions are shown in Figure 2.
Figure 2. Overall and mounting dimensions
Order information for Multisensor Inner Diameter Measurement System
|Dmin||Minimum measurement diameter, mm|
|Dmax||Maximum measurement diameter, mm|
Example: RF040-65/115 – Multisensor Inner Diameter Measurement System RF040, measurement range - 65...115 mm.