LS 220 New Class 2 Laser
LS 220 - Laser Diastance Sensor
The FAE LS 220 series distance sensor measure distances of up to 150 meters, at output rates of up to 50 Hz, using the proven phase comparison method, which allows accuracy of few millimiters. On natural surfaces, within a range of 30 m, the accuracy fall below the millimiter.
The LS 220 series is available in several models for different industrial field-buses standards based on wired or wireless ethernet.
MODELS
The sensors of the FAE LS 220 series are available in several models, which must be specified at order time:
|
MODEL |
INTERFACE |
PROTOCOL |
|
LS 220 PN |
Ethernet 10/100Mb
|
Profinet-RT IO-DEVICE Class B |
|
LS 220 EP |
Ethernet/IP |
|
|
LS 220 IT |
Modbus/TCP, MQTT, HTTP
|
|
|
LS 220 WF |
Wi-Fi 802.11 a/b/g/n |
ASCII TCP/IP PROTOCOL
All the models implement, simultaneously with the communication functions over the field-bus, the ASCII communication protocol based on TCP/IP socket, which can be used both for the set-up of the sensor and for the communication of the measurements results.
MECHANICAL SPECIFICATIONS
|
Dimension (L x W x H) |
211 x 106.2 x 62 mm |
|
Weight |
|
|
Protection level |
IP67 (connectors plugged and locked) |
|
Materials and Finishes |
Body: extruded aluminum 6063, neutral anodization End panel: diecast aluminum, black powder coated Light shield: aluminum 6082, black anodization Screws: inox steel A2 |
|
Storage temperature |
from -20°C to +60°C |
|
Operating temperature |
from -10°C to +50°C |
|
Humidity |
from 10% to 90%, without condensation |
|
Mounting |
4x M4 |
|
Optics accessory thread |
M45x2 |
MEASUREMENT PROCESS SPECIFICATIONS
|
Measure method |
Phase comparison |
|
Laser source |
|
|
Divergence |
0.6mrad |
|
Class |
Laser Class 2, EN 60825-1:2014 |
|
Power |
≤ 1mW |
|
Wave length λ |
650nm (red) |
|
Measurement mode |
Single shot Continuos Continuos, up to 7m Continuos, cooperative target External trigger |
|
Frequency |
up to 50Hz |
|
Resolution |
0.1mm |
|
Working range |
|
|
Nominal |
from 0.1m to 150m |
|
Collaborative target |
from 25m to 150m |
|
Natural surface1 |
from 0.1m to 30m |
|
Accuracy |
|
|
from 15°C a +30°C |
± 3mm (±1mm up to 30m) |
|
from -10°C a +50°C |
± 5mm |
1 Measurement range and accuracy for naturally diffuse reflecting surface, depending on target reflectivity, stray light and environmental conditions.
Products
Download
Photo gallery
Contattaci
Non esitate a contattarci, saremo lieti di soddisfare qualsiasi vostra richiesta di informazione di natura tecnica ed economica,relative alla nostra sensoristica.
Chiedi informazioni